Study of the influence of nanoparticles on the performance and the properties of polyamide 6
von Mohammad Reza Sarbandi
Statistik und Sichtungsnachweis dieser Seite findet sich am Artikelende
[1.] Mrs/Fragment 051 02 - Diskussion Zuletzt bearbeitet: 2015-03-22 15:21:05 WiseWoman | Fornes 2003, Fragment, Gesichtet, Mrs, SMWFragment, Schutzlevel sysop, Verschleierung |
|
|
Untersuchte Arbeit: Seite: 51, Zeilen: 2-10 |
Quelle: Fornes 2003 Seite(n): 259, Zeilen: 10ff |
---|---|
Wu and Liao examined the effect of thermal history and filler concentration on the crystal structure of polyamide 6 nanocomposites formed by in situ polymerization using synthetic saponite and natural montmorillonite [208, 209]. Similar crystalline behavior was observed for the pure and nanocomposite materials when samples were slowly or rapidly cooled from the melt; however, nanocomposites containing a low concentration of saponite, i.e. 2.5 wt. %, favored the formation of the α-form regardless of the cooling conditions, whereas by increasing silica content γ-form is more dominant (Figure 4.5). Annealing studies showed that higher amounts of γ were present in the nanocomposite than in pure polyamide 6 after annealing at high temperatures, except at low saponite contents.
[208] T.M. Wu, C.S. Liao, Macromolecular Chemistry and Physics 2000;201(18):2820–5. [209] T.M. Wu, E.C. Chen, C.S. Liao, Polymer Engineering Science 2002;42(6):1141–50. |
Wu and Liao examined the effect of thermal history and filler concentration on the crystal structure of nylon 6 nanocomposites formed by in situ polymerization using synthetic saponite and natural montmorillonite [53, 54]. Similar crystalline behavior was observed for the pure and nanocomposite materials when samples were slowly or rapidly cooled from the melt; however, nanocomposites containing a low concentration of saponite, i.e., 2.5 weight %, favored the formation of the α-form regardless of the cooling conditions. Annealing studies showed that higher amounts of γ were present in the nanocomposite than in pure nylon 6 after annealing at high temperatures, except at low saponite contents.
53. Wu, T-M, Liao, C-S. Macromolecular Chem Phys 2000;201(18): 2820-5. 54. Wu, T-M, Chen, E-C, Liao, C-S. Polym Engng Sci 2002;42(6): 1141-50. |
A source is not mentioned. The description from Fornes' thesis is also to be found at Fornes, T.D. & Paul, D. R. (2003). Crystallization behavior of nylon 6 nanocomposites. In Polymer 44, pp. 3945–3961. |
|
vorherige Seite | zur Übersichtsseite | folgende Seite
Letzte Bearbeitung dieser Seite: durch Benutzer:WiseWoman, Zeitstempel: 20150322152146
Letzte Bearbeitung dieser Seite: durch Benutzer:WiseWoman, Zeitstempel: 20150322152146